What You’ll Need
• False strip lashes
• Lash adhesive
• Lash applicator or tweezers
• Small scissors
• Mirror
• Optional eyeliner and mascara
How to Apply Strip Lashes
1. Remove the Lash
Carefully remove the lash from the tray. For best results, use tweezers and avoid pulling directly on the lash fibers.
2. Measure & Trim
Place the lash against your eye to check the fit. If the band is too long, carefully trim a small amount from the outer end until it fits comfortably.
3. Apply Lash Adhesive
Apply a thin layer of lash adhesive along the lash band. Wait a few moments for the adhesive to become tacky before applying.
4. Apply the Lash
Carefully position the strip along your lash line. Once you’re happy with the placement, gently press the band into place.
How to Apply Lash Clusters
1. Remove the Cluster
Use tweezers to gently remove a cluster from the tray. Grab the cluster near the base to help protect the lash fibers.
2. Apply Bond
Apply Bond to the base of the cluster and a light amount to your natural lashes. Wait until the Bond becomes tacky.
3. Apply the Clusters
Using tweezers, carefully place each cluster underneath your natural lashes, approximately 2 to 3 mm away from the lash line.
Continue placing clusters until you’ve completed your desired look.
4. Apply Seal
Apply Seal to the base of the clusters. For best results, blotting/tapping will prevent the lashes from hardening/crusting. Gently press the clusters and your natural lashes together with your tweezers to finish.
Lash Application Do’s & Don’ts
DO ✓
• Wash your hands before handling your lashes or eye area.
• Start with clean, dry lashes for better adhesion.
• Measure strip lashes before applying and trim from the outer end to fit your eye shape if needed.
• Wait for adhesive or Bond to become tacky before placement.
• Use clean tweezers for more precise application.
• Apply clusters slightly away from the lash line, not directly onto the skin.
• Use an appropriate amount of adhesive and add more only if needed.
• Remove lashes gently with micellar water or an oil-based makeup remover to help protect your natural lashes.
DON’T ✕
• Don’t apply lashes to irritated or injured eyes.
• Don’t place lash adhesive directly inside the eye.
• Don’t apply clusters directly onto the waterline.
• Don’t use excessive Bond or adhesive. More isn’t always better.
• Don’t pull or rip lashes off when removing them.
• Don’t share used lashes or application tools.
• Don’t continue use if you experience irritation or discomfort.
PRESS START ✦
Lash application gets easier with practice, so take your time and find the technique that works best for you. Whether you’re getting ready for everyday wear or your next side quest, KiraKiraBrand has the tools to complete your look.